Geregistreerd op: 16 Okt 2017
|Geplaatst: Ma Okt 16, 2017 10:30 am Onderwerp: How to maintenance of household inkjet printers?
|Place the printer on the horizontal desktop
As the inkjet printer itself works, the printer must be placed in a horizontal plane, tilting work will not only affect the printing effect, slow down the nozzle speed, and will damage the internal mechanical structure. Do not put the printer on the ground, especially the carpeted ground, it is easy to have foreign body or dust into the machine inside.
Do dust control measures
When the printer is working, do not open the front panel, one to print no good looking, that is, the nozzle moved to remove it, and two to avoid dust into the machine inside. After printing, heat for half an hour, immediately cover the dust cover, do not vacant in the room.
Turn off the machine before pulling the power supply
Do not use the printer or move, do the permanent power off work, turn off the printer power (if any), let the nozzle reset and ink tank cover, and then unplug the power cord and signal line. To prevent the evaporation of ink, moving in the nozzle is not easy to damage.
Carefully install the ink cartridge
The support mechanism of the canon ink cartridges can be very small, be sure to install the new brother tn 660, according to the normal design, the cartridge can be installed with the appropriate strength, do not vigorously promote the bracket.
The printer outside the same as the internal, should be regular cleaning, do not wait until the thick layer of dust, a problem to remedy. The outside of the printer can be wiped with a soft cloth, clean liquid must be a neutral substance such as water, absolutely can not use alcohol. The internal as far as possible with a dry cloth to wipe, and can not touch the internal electronic components, mechanical devices.
Internal maintenance of the printer
The cleaning of the nozzle as far as possible not to do it manually, the best way is to use software-controlled print head cleaning procedures to complete. Especially after adding ink, be sure to clean the print head, to prevent the two kinds of ink mixed to produce solidification. In addition, if the print quality is reduced when printing, such as streaking, color loss, etc., the same need to clean the nozzle.