Fedora-Linux.nl Forumindex Fedora-Linux.nl
Het forum van Fedora-Linux.nl.
Deze site wordt gehost door Exonet Internet Services
 
 FAQFAQ   ZoekenZoeken   GebruikerslijstGebruikerslijst   GebruikersgroepenGebruikersgroepen   RegistrerenRegistreren 
 ProfielProfiel   Log in om je privéberichten te bekijkenLog in om je privéberichten te bekijken   InloggenInloggen 

webcam met cheese en amsn en kopete

 
Nieuw onderwerp plaatsen   Reageren    Fedora-Linux.nl Forumindex -> Software
Vorige onderwerp :: Volgende onderwerp  
Auteur Bericht
fwhmjanssen



Geregistreerd op: 17 Mei 2007
Berichten: 21

BerichtGeplaatst: Do Jan 31, 2008 3:32 pm    Onderwerp: webcam met cheese en amsn en kopete Reageren met citaat

[root@ATHLON frans]# cheese
** Message: Probing the webcam, please ignore the following, not applicabable tries
** Message: Error running pipeline 'v4l2src ! fakesink': Could not open device '/dev/video0' for reading and writing. [v4l2_calls.c(418): gst_v4l2_open (): /pipeline0/v4l2src0:
system error: Ongeldig argument]
** Message: test pipeline for v4l2src failed:
[v4l2src ! fakesink]: Could not open device '/dev/video0' for reading and writing.
** Message: Error running pipeline 'v4lsrc ! video/x-raw-rgb,width=640,height=480 ! fakesink': Kan apparaat "/dev/video0" niet openen voor lezen en schrijven. [v4l_calls.c(179): gst_v4l_open (): /pipeline1/v4lsrc0:
system error: Ongeldig argument]
** Message: test pipeline for v4lsrc failed:
[v4lsrc ! video/x-raw-rgb,width=640,height=480 ! fakesink]: Kan apparaat "/dev/video0" niet openen voor lezen en schrijven.
** Message: Error running pipeline 'v4lsrc ! video/x-raw-yuv,width=640,height=480 ! fakesink': Kan apparaat "/dev/video0" niet openen voor lezen en schrijven. [v4l_calls.c(179): gst_v4l_open (): /pipeline2/v4lsrc1:
system error: Ongeldig argument]
** Message: test pipeline for v4lsrc failed:
[v4lsrc ! video/x-raw-yuv,width=640,height=480 ! fakesink]: Kan apparaat "/dev/video0" niet openen voor lezen en schrijven.
** Message: Error running pipeline 'v4lsrc ! video/x-raw-rgb,width=320,height=240 ! fakesink': Kan apparaat "/dev/video0" niet openen voor lezen en schrijven. [v4l_calls.c(179): gst_v4l_open (): /pipeline3/v4lsrc2:
system error: Ongeldig argument]
** Message: test pipeline for v4lsrc failed:
[v4lsrc ! video/x-raw-rgb,width=320,height=240 ! fakesink]: Kan apparaat "/dev/video0" niet openen voor lezen en schrijven.
** Message: Error running pipeline 'v4lsrc ! video/x-raw-rgb,width=1280,height=960 ! fakesink': Kan apparaat "/dev/video0" niet openen voor lezen en schrijven. [v4l_calls.c(179): gst_v4l_open (): /pipeline4/v4lsrc3:
system error: Ongeldig argument]
** Message: test pipeline for v4lsrc failed:
[v4lsrc ! video/x-raw-rgb,width=1280,height=960 ! fakesink]: Kan apparaat "/dev/video0" niet openen voor lezen en schrijven.
** Message: Error running pipeline 'v4lsrc ! video/x-raw-rgb,width=174,height=144 ! fakesink': Kan apparaat "/dev/video0" niet openen voor lezen en schrijven. [v4l_calls.c(179): gst_v4l_open (): /pipeline5/v4lsrc4:
system error: Ongeldig argument]
** Message: test pipeline for v4lsrc failed:
[v4lsrc ! video/x-raw-rgb,width=174,height=144 ! fakesink]: Kan apparaat "/dev/video0" niet openen voor lezen en schrijven.
** Message: Error running pipeline 'v4lsrc ! video/x-raw-rgb,width=160,height=120 ! fakesink': Kan apparaat "/dev/video0" niet openen voor lezen en schrijven. [v4l_calls.c(179): gst_v4l_open (): /pipeline6/v4lsrc5:
system error: Ongeldig argument]
** Message: test pipeline for v4lsrc failed:
[v4lsrc ! video/x-raw-rgb,width=160,height=120 ! fakesink]: Kan apparaat "/dev/video0" niet openen voor lezen en schrijven.
** Message: Error running pipeline 'v4lsrc ! fakesink': Kan apparaat "/dev/video0" niet openen voor lezen en schrijven. [v4l_calls.c(179): gst_v4l_open (): /pipeline7/v4lsrc6:
system error: Ongeldig argument]
** Message: test pipeline for v4lsrc failed:
[v4lsrc ! fakesink]: Kan apparaat "/dev/video0" niet openen voor lezen en schrijven.
using photo source: videotestsrc
using video source: videotestsrc
[root@ATHLON frans]# cheese
** Message: Probing the webcam, please ignore the following, not applicabable tries
** Message: Error running pipeline 'v4l2src ! fakesink': Could not open device '/dev/video0' for reading and writing. [v4l2_calls.c(418): gst_v4l2_open (): /pipeline0/v4l2src0:
system error: Ongeldig argument]
** Message: test pipeline for v4l2src failed:
[v4l2src ! fakesink]: Could not open device '/dev/video0' for reading and writing.
** Message: Error running pipeline 'v4lsrc ! video/x-raw-rgb,width=640,height=480 ! fakesink': Kan apparaat "/dev/video0" niet openen voor lezen en schrijven. [v4l_calls.c(179): gst_v4l_open (): /pipeline1/v4lsrc0:
system error: Ongeldig argument]
** Message: test pipeline for v4lsrc failed:
[v4lsrc ! video/x-raw-rgb,width=640,height=480 ! fakesink]: Kan apparaat "/dev/video0" niet openen voor lezen en schrijven.
** Message: Error running pipeline 'v4lsrc ! video/x-raw-yuv,width=640,height=480 ! fakesink': Kan apparaat "/dev/video0" niet openen voor lezen en schrijven. [v4l_calls.c(179): gst_v4l_open (): /pipeline2/v4lsrc1:
system error: Ongeldig argument]
** Message: test pipeline for v4lsrc failed:
[v4lsrc ! video/x-raw-yuv,width=640,height=480 ! fakesink]: Kan apparaat "/dev/video0" niet openen voor lezen en schrijven.
** Message: Error running pipeline 'v4lsrc ! video/x-raw-rgb,width=320,height=240 ! fakesink': Kan apparaat "/dev/video0" niet openen voor lezen en schrijven. [v4l_calls.c(179): gst_v4l_open (): /pipeline3/v4lsrc2:
system error: Ongeldig argument]
** Message: test pipeline for v4lsrc failed:
[v4lsrc ! video/x-raw-rgb,width=320,height=240 ! fakesink]: Kan apparaat "/dev/video0" niet openen voor lezen en schrijven.
** Message: Error running pipeline 'v4lsrc ! video/x-raw-rgb,width=1280,height=960 ! fakesink': Kan apparaat "/dev/video0" niet openen voor lezen en schrijven. [v4l_calls.c(179): gst_v4l_open (): /pipeline4/v4lsrc3:
system error: Ongeldig argument]
** Message: test pipeline for v4lsrc failed:
[v4lsrc ! video/x-raw-rgb,width=1280,height=960 ! fakesink]: Kan apparaat "/dev/video0" niet openen voor lezen en schrijven.
** Message: Error running pipeline 'v4lsrc ! video/x-raw-rgb,width=174,height=144 ! fakesink': Kan apparaat "/dev/video0" niet openen voor lezen en schrijven. [v4l_calls.c(179): gst_v4l_open (): /pipeline5/v4lsrc4:
system error: Ongeldig argument]
** Message: test pipeline for v4lsrc failed:
[v4lsrc ! video/x-raw-rgb,width=174,height=144 ! fakesink]: Kan apparaat "/dev/video0" niet openen voor lezen en schrijven.
** Message: Error running pipeline 'v4lsrc ! video/x-raw-rgb,width=160,height=120 ! fakesink': Kan apparaat "/dev/video0" niet openen voor lezen en schrijven. [v4l_calls.c(179): gst_v4l_open (): /pipeline6/v4lsrc5:
system error: Ongeldig argument]
** Message: test pipeline for v4lsrc failed:
[v4lsrc ! video/x-raw-rgb,width=160,height=120 ! fakesink]: Kan apparaat "/dev/video0" niet openen voor lezen en schrijven.
** Message: Error running pipeline 'v4lsrc ! fakesink': Kan apparaat "/dev/video0" niet openen voor lezen en schrijven. [v4l_calls.c(179): gst_v4l_open (): /pipeline7/v4lsrc6:
system error: Ongeldig argument]
** Message: test pipeline for v4lsrc failed:
[v4lsrc ! fakesink]: Kan apparaat "/dev/video0" niet openen voor lezen en schrijven.
using photo source: videotestsrc
using video source: videotestsrc

met amsn werkt hij ook niet en met kopete ook niet en asl ik
spcaview ingeef in de terminal krijg ik dit :
[root@ATHLON frans]# spcaview
Spcaview version: 1.1.8 date: 25:12:2007 (C) mxhaard@magic.fr
Initializing SDL.
SDL initialized.
bpp 3 format 15
Using video device /dev/video0.
Initializing v4l.
ERROR opening V4L interface
: Invalid argument

ik werk met fedora 8 met kernel 2.6.23.9-107
en heb een trust wb1400T webcam
mischien kan mij iemand helpen
MvG fwhm.janssen
Terug naar boven
Profiel bekijken Stuur privébericht
fwhmjanssen



Geregistreerd op: 17 Mei 2007
Berichten: 21

BerichtGeplaatst: Do Jan 31, 2008 3:35 pm    Onderwerp: dmesg webcam met cheese en amsn en kopete Reageren met citaat

mijn dmesg is ::
[root@ATHLON frans]# dmesg
Linux version 2.6.23.9-85.fc8 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Fri Dec 7 15:49:59 EST 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d0000 - 00000000000d6000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI data)
BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fb940
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 262128) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 262128
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 262128
On node 0 totalpages: 262128
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 255 pages used for memmap
HighMem zone: 32497 pages, LIFO batch:7
Movable zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000FA8E0, 0014 (r0 AMI )
ACPI: RSDT 3FFF0000, 002C (r1 AMIINT VIA_K7 10 MSFT 97)
ACPI: FACP 3FFF0030, 0081 (r1 AMIINT VIA_K7 11 MSFT 97)
ACPI: DSDT 3FFF0120, 3311 (r1 VIA VIA_K7 1000 MSFT 100000D)
ACPI: FACS 3FFF8000, 0040
ACPI: APIC 3FFF00C0, 0054 (r1 AMIINT VIA_K7 9 MSFT 97)
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d0000
swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000d6000
swsusp: Registered nosave memory region: 00000000000d6000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists in Zone order. Total pages: 260081
Kernel command line: ro root=LABEL=/1 rhgb quiet
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07a8000 soft=c0788000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1837.541 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1031308k/1048512k available (2184k kernel code, 16396k reserved, 1116k data, 280k init, 131008k highmem)
virtual kernel memory layout:
fixmap : 0xffc53000 - 0xfffff000 (3760 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc073f000 - 0xc0785000 ( 280 kB)
.data : 0xc06222f5 - 0xc0739544 (1116 kB)
.text : 0xc0400000 - 0xc06222f5 (2184 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 3677.25 BogoMIPS (lpj=1838626)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383f3ff c1c3fbff 00000000 00000420 00000000 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 14k freed
ACPI: Core revision 20070126
CPU0: AMD Athlon(tm) XP 2500+ stepping 00
Total of 1 processors activated (3677.25 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=180 bytes
sizeof(task_struct)=1552 bytes
Booting paravirtualized kernel on bare hardware
Time: 10:20:38 Date: 01/31/08
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
Failed to force enable HPET
PCI quirk: region 0800-087f claimed by vt8235 PM
PCI quirk: region 0400-040f claimed by vt8235 SMB
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: dde00000-dfefffff
PREFETCH window: cdb00000-ddcfffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2920k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1201774838.439:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 4BB254D1F8000763
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected. Disabling DAC.
Boot video device is 0000:01:00.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU1] (supports 16 throttling states)
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
agpgart: Detected VIA KT266/KY266x/KT333 chipset
agpgart: AGP aperture is 256M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Processor cpuid 6a0 not supported
Using IPI No-Shortcut mode
Magic number: 8:628:326
Freeing unused kernel memory: 280k freed
Write protecting the kernel read-only data: 844k
ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 16
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: irq 16, io mem 0xdffeff00
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 16
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 16, io base 0x0000dc00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 16
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 16, io base 0x0000e000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 16
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 16, io base 0x0000e400
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-4: new high speed USB device using ehci_hcd and address 3
SCSI subsystem initialized
libata version 2.21 loaded.
pata_via 0000:00:11.1: version 0.3.2
ACPI: Unable to derive IRQ for device 0000:00:11.1
ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
scsi0 : pata_via
scsi1 : pata_via
ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14
ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15
usb 1-4: configuration #1 chosen from 1 choice
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
ata1.00: ATA-6: ST380011A, 3.54, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48
ata1.01: ATA-5: MAXTOR 6L080J4, A93.0500, max UDMA/133
ata1.01: 156355584 sectors, multi 16: LBA
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/133
usb 2-2: new low speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
ata2.00: ATAPI: LITE-ON DVD+RW LDW-401S, ES0G, max UDMA/33
ata2.01: ATA-7: Maxtor 6Y120L0, YAR41BW0, max UDMA/133
ata2.01: 240121728 sectors, multi 16: LBA
input: Wireless Mouse Wireless Mouse as /class/input/input2
input: USB HID v1.10 Mouse [Wireless Mouse Wireless Mouse] on usb-0000:00:10.0-2
ata2.00: configured for UDMA/33
ata2.01: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST380011A 3.54 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 <sda5>
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 0:0:1:0: Direct-Access ATA MAXTOR 6L080J4 A93. PQ: 0 ANSI: 5
sd 0:0:1:0: [sdb] 156355584 512-byte hardware sectors (80054 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sdb] 156355584 512-byte hardware sectors (80054 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 0:0:1:0: [sdb] Attached SCSI disk
scsi 1:0:0:0: CD-ROM LITE-ON DVD+RW LDW-401S ES0G PQ: 0 ANSI: 5
scsi 1:0:1:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5
sd 1:0:1:0: [sdc] 240121728 512-byte hardware sectors (122942 MB)
sd 1:0:1:0: [sdc] Write Protect is off
sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:1:0: [sdc] 240121728 512-byte hardware sectors (122942 MB)
sd 1:0:1:0: [sdc] Write Protect is off
sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: sdc1 <sdc5>
sd 1:0:1:0: [sdc] Attached SCSI disk
usb 1-4.1: new full speed USB device using ehci_hcd and address 4
usb 1-4.1: configuration #1 chosen from 1 choice
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1201774846.814:2): selinux=0 auid=4294967295
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sr 1:0:0:0: Attached scsi generic sg2 type 5
sd 1:0:1:0: Attached scsi generic sg3 type 0
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
input: PC Speaker as /class/input/input3
Linux video capture interface: v2.00
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 17
eth0: RealTek RTL-8029 found at 0xe800, IRQ 17, 00:50:BF:E1:6D:21.
/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: USB GSPCA camera found. (PAC207)
/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_probe:4098] Camera type GBRG
/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_getcapability:1215] maxw 352 maxh 288 minw 160 minh 120
/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: data format set to RGB
usbcore: registered new interface driver gspca
/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: gspca driver 01.00.18 registered
wlan: trunk
input: Power Button (FF) as /class/input/input4
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input5
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input6
ACPI: Sleep Button (CM) [SLPB]
NET: Registered protocol family 23
ath_pci: trunk
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 18
ath_pci: switching rfkill capability off
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
ath_rate_sample: 1.2 (trunk)
ath_pci: switching per-packet transmit power control off
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 5.9 phy 4.3 radio 4.6
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0xdfff0000, irq=18
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19
NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.01 Wed Sep 5 19:12:23 PDT 2007
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 18
bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 18, latency: 32, mmio: 0xdddfe000
bttv0: using: Prolink PixelView PlayTV pro [card=37,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
bttv0: tuner type=20
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
tuner 1-0061: type set to 20 (Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5))
tuner 1-0061: type set to 20 (Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5))
bttv0: registered device video1
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:00:0a.1[A] -> GSI 17 (level, low) -> IRQ 18
bt878_probe: card id=[0x0], Unknown card.
Exiting..
ACPI: PCI interrupt for device 0000:00:0a.1 disabled
bt878: probe of 0000:00:0a.1 failed with error -22
net wlan0: device_rename: sysfs_create_symlink failed (-17)
udev: renamed network interface ath0 to wlan0
ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 20
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Adding 1052216k swap on /dev/sda7. Priority:-1 extents:1 across:1052216k
audit(1201771277.069:3): audit_pid=1829 old=0 by auid=4294967295
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
wlan0: no IPv6 routers present
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

usb 1-4.1: USB disconnect, address 4
usb 1-4.1: new full speed USB device using ehci_hcd and address 5
usb 1-4.1: configuration #1 chosen from 1 choice
/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: USB GSPCA camera found. (PAC207)
/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_probe:4098] Camera type GBRG
/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_getcapability:1215] maxw 352 maxh 288 minw 160 minh 120
/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: data format set to RGB
/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

usb 1-4.1: USB disconnect, address 5
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: USB GSPCA camera found. (PAC207)
/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_probe:4098] Camera type GBRG
/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_getcapability:1215] maxw 352 maxh 288 minw 160 minh 120
/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: data format set to RGB
/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source

/var/tmp/bach-build/BUILD/gspcav1-20070508/gspca_core.c: [spca5xx_open:1940] DEALLOC error on spca50x_init_source
Terug naar boven
Profiel bekijken Stuur privébericht
fwhmjanssen



Geregistreerd op: 17 Mei 2007
Berichten: 21

BerichtGeplaatst: Do Jan 31, 2008 3:56 pm    Onderwerp: gedit /usr/src/gspca-1.0.18-1/Pixart/pac207.h Reageren met citaat

dit is mijn config van pac207.h


#ifndef PAC207USB_H
#define PAC207USB_H
/****************************************************************************
# Pixart PAC207BCA library #
# Copyright (C) 2005 Thomas Kaiser thomas@kaiser-linux.li #
# Copyleft (C) 2005 Michel Xhaard mxhaard@magic.fr #
# #
# This program is free software; you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
# the Free Software Foundation; either version 2 of the License, or #
# (at your option) any later version. #
# #
# This program is distributed in the hope that it will be useful, #
# but WITHOUT ANY WARRANTY; without even the implied warranty of #
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
# GNU General Public License for more details. #
# #
# You should have received a copy of the GNU General Public License #
# along with this program; if not, write to the Free Software #
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA #
# #
****************************************************************************/


static __u8 pac207_sensor_init[][8] = {
{0x10, 0x12, 0x0d, 0x12, 0x0c, 0x01, 0x29, 0xf0}, //2
//{0x10, 0x24, 0x06, 0x12, 0x0c, 0x01, 0x29, 0xf0}, //2 increase the times exposure decrease frame rate
{0x00, 0x64, 0x64, 0x64, 0x04, 0x10, 0xF0, 0x30}, //a reg_10 digital gain Red Green Blue Ggain
{0x00, 0x00, 0x00, 0x70, 0xA0, 0xF8, 0x00, 0x00}, //12
{0x00, 0x00, 0x32, 0x00, 0x96, 0x00, 0xA2, 0x02}, //40
{0x32, 0x00, 0x96, 0x00, 0xA2, 0x02, 0xAF, 0x00}, //42 reg_66 rate control
};

static __u8 PacReg72[] = { 0x00, 0x00, 0x36, 0x00 }; //48 reg_72 Rate Control end BalSize_4a =0x36

/******************* Camera Interface ***********************/
static __u16 pac207_getbrightness(struct usb_spca50x *spca50x);
static __u16 pac207_getcontrast(struct usb_spca50x *spca50x);
static __u16 pac207_getcolors(struct usb_spca50x *spca50x);
static void pac207_setbrightness(struct usb_spca50x *spca50x);
static void pac207_setcontrast(struct usb_spca50x *spca50x);
static void pac207_setcolors(struct usb_spca50x *spca50x);
static int pac207_init(struct usb_spca50x *spca50x);
static void pac207_start(struct usb_spca50x *spca50x);
static void pac207_stopN(struct usb_spca50x *spca50x);
static void pac207_stop0(struct usb_spca50x *spca50x);
static int pac207_config(struct usb_spca50x *spca50x);
static void pac207_shutdown(struct usb_spca50x *spca50x);
static void pac207_setAutobright(struct usb_spca50x *spca50x);
static void pac207_setquality(struct usb_spca50x *spca50x);
static int pac207_sofdetect(struct usb_spca50x *spca50x,struct spca50x_frame *frame, unsigned char *cdata,int *iPix, int seqnum, int *datalength);
/*******************************************************************/
static __u16 pac207_getcolors(struct usb_spca50x *spca50x){return 0 ;}
static void pac207_setcolors(struct usb_spca50x *spca50x){ spca50x->colour = 0;}
static void pac207_stop0(struct usb_spca50x *spca50x){}
static void pac207_setquality(struct usb_spca50x *spca50x){}
/******************* Camera Private ***********************/
static void pac207_reg_write(struct usb_device *dev, __u16 index,
__u16 value);
static void pac207_reg_read(struct usb_device *dev, __u16 index,
__u8 * buffer);

/***************************** Implementation ****************************/
static struct cam_operation fpac207 = {
.initialize = pac207_init,
.configure = pac207_config,
.start = pac207_start,
.stopN = pac207_stopN,
.stop0 = pac207_stop0,
.get_bright = pac207_getbrightness,
.set_bright = pac207_setbrightness,
.get_contrast = pac207_getcontrast,
.set_contrast = pac207_setcontrast,
.get_colors = pac207_getcolors,
.set_colors = pac207_setcolors,
.set_autobright = pac207_setAutobright,
.set_quality = pac207_setquality,
.cam_shutdown = pac207_shutdown,
.sof_detect = pac207_sofdetect,
};
static void pac207_reg_read(struct usb_device *dev, __u16 index,
__u8 * buffer)
{
pac207RegRead(dev, 0x00, 0x00, index, buffer, 1);
return;
}

static void pac207_reg_write(struct usb_device *dev, __u16 index,
__u16 value)
{
pac207RegWrite(dev, 0x00, value, index, NULL, 0);
return;
}


static __u16 pac207_getbrightness(struct usb_spca50x *spca50x)
{
__u8 brightness = 0;
pac207_reg_read(spca50x->dev, 0x0008, &brightness);
spca50x->brightness = brightness <<8>brightness;
}
static __u16 pac207_getcontrast(struct usb_spca50x *spca50x)
{
__u8 contrast = 0;
pac207_reg_read(spca50x->dev, 0x000e, &contrast);
spca50x->contrast = contrast <<11>contrast;
}
static void pac207_setcontrast(struct usb_spca50x *spca50x)
{
__u8 contrast = spca50x->contrast >> 11;
pac207_reg_write(spca50x->dev, 0x000e, contrast);
pac207_reg_write(spca50x->dev, 0x13, 0x01); //load registers to sensor (Bit 0, auto clear)
pac207_reg_write(spca50x->dev, 0x1c, 0x01); //not documented
}
static void pac207_setbrightness(struct usb_spca50x *spca50x)
{

__u8 brightness = spca50x->brightness >> 8;
pac207_reg_write(spca50x->dev, 0x0008, brightness);
pac207_reg_write(spca50x->dev, 0x13, 0x01); //load registers to sensor (Bit 0, auto clear)
pac207_reg_write(spca50x->dev, 0x1c, 0x01); //not documented
}

static int pac207_init(struct usb_spca50x *spca50x)
{
__u8 id[] = { 0, 0 };
pac207_reg_write(spca50x->dev, 0x41, 0x00); //Turn of LED
pac207_reg_read(spca50x->dev, 0x0000, &id[0]);
pac207_reg_read(spca50x->dev, 0x0001, &id[1]);
id[0] = ((id[0] & 0x0F) <<4>> 4);
id[1] = id[1] & 0x0f;
PDEBUG(2, " Pixart Sensor ID 0x%02X27 Chips ID 0x%02X08 !!\n", id[0],
id[1]);
if (id[0] != 0x093a || id[1] != 0x2468)
return -ENODEV;

return 0;
}

static void set_pac207SIF(struct usb_spca50x *spca50x)
{
memset(spca50x->mode_cam, 0x00, TOTMODE * sizeof(struct mwebcam));
spca50x->mode_cam[SIF].width = 352;
spca50x->mode_cam[SIF].height = 288;
spca50x->mode_cam[SIF].t_palette =
P_RAW | P_YUV420 | P_RGB32 | P_RGB24 | P_RGB16;
spca50x->mode_cam[SIF].pipe = 1023;
spca50x->mode_cam[SIF].method = 0;
spca50x->mode_cam[SIF].mode = 0;
spca50x->mode_cam[CIF].width = 320;
spca50x->mode_cam[CIF].height = 240;
spca50x->mode_cam[CIF].t_palette =
P_YUV420 | P_RGB32 | P_RGB24 | P_RGB16;
spca50x->mode_cam[CIF].pipe = 1023;
spca50x->mode_cam[CIF].method = 1;
spca50x->mode_cam[CIF].mode = 0;
spca50x->mode_cam[QPAL].width = 192;
spca50x->mode_cam[QPAL].height = 144;
spca50x->mode_cam[QPAL].t_palette =
P_YUV420 | P_RGB32 | P_RGB24 | P_RGB16;
spca50x->mode_cam[QPAL].pipe = 1023;
spca50x->mode_cam[QPAL].method = 1;
spca50x->mode_cam[QPAL].mode = 1;
spca50x->mode_cam[QSIF].width = 176;
spca50x->mode_cam[QSIF].height = 144;
spca50x->mode_cam[QSIF].t_palette =
P_RAW | P_YUV420 | P_RGB32 | P_RGB24 | P_RGB16;
spca50x->mode_cam[QSIF].pipe = 1023;
spca50x->mode_cam[QSIF].method = 0;
spca50x->mode_cam[QSIF].mode = 1;
spca50x->mode_cam[QCIF].width = 160;
spca50x->mode_cam[QCIF].height = 120;
spca50x->mode_cam[QCIF].t_palette =
P_YUV420 | P_RGB32 | P_RGB24 | P_RGB16;
spca50x->mode_cam[QCIF].pipe = 1023;
spca50x->mode_cam[QCIF].method = 1;
spca50x->mode_cam[QCIF].mode = 1;
return;
}

static int pac207_config(struct usb_spca50x *spca50x)
{

PDEBUG(2, "Find Sensor PAC207");
spca50x->sensor = SENSOR_PAC207;
set_pac207SIF(spca50x);
pac207_reg_write(spca50x->dev, 0x41, 0x00); //00 Bit_0=Image Format, Bit_1=LED, Bit_2=Compression test mode enable
pac207_reg_write(spca50x->dev, 0x0f, 0x00); //Power Control
pac207_reg_write(spca50x->dev, 0x11, 0x30); //Analog Bias

return 0;
}

static void pac207_start(struct usb_spca50x *spca50x)
{

__u8 buffer;
__u8 mode;

pac207_reg_write(spca50x->dev, 0x0f, 0x10); //Power control (Bit 6-0)
pac207RegWrite(spca50x->dev, 0x01, 0, 0x0002, pac207_sensor_init[0],
Cool;
pac207RegWrite(spca50x->dev, 0x01, 0, 0x000a, pac207_sensor_init[1],
Cool;
pac207RegWrite(spca50x->dev, 0x01, 0, 0x0012, pac207_sensor_init[2],
Cool;
pac207RegWrite(spca50x->dev, 0x01, 0, 0x0040, pac207_sensor_init[3],
Cool;
pac207RegWrite(spca50x->dev, 0x01, 0, 0x0042, pac207_sensor_init[4],
Cool;
pac207RegWrite(spca50x->dev, 0x01, 0, 0x0048, PacReg72, 4);
if (spca50x->compress) {
pac207_reg_write(spca50x->dev, 0x4a, 0x88); //Compression Balance size 0x88
} else {
pac207_reg_write(spca50x->dev, 0x4a, 0xff); //Compression Balance size
}
pac207_reg_write(spca50x->dev, 0x4b, 0x00); //Sram test value
pac207_reg_write(spca50x->dev, 0x13, 0x01); //load registers to sensor (Bit 0, auto clear)
pac207_reg_write(spca50x->dev, 0x1c, 0x01); //not documented
pac207_reg_write(spca50x->dev, 0x41, 0x02); //Image Format (Bit 0), LED (Bit 1), Compression test mode enable (Bit 2)

if (spca50x->mode) {
/* 176x144 */
pac207_reg_read(spca50x->dev, 0x41, &buffer);
mode = buffer | 0x01;
//mode = buffer | 0x00;
pac207_reg_write(spca50x->dev, 0x41, mode); //Set mode
pac207_reg_write(spca50x->dev, 0x02, 0x04); //PXCK = 12MHz /n
pac207_reg_write(spca50x->dev, 0x0e, 0x0f); //PGA global gain (Bit 4-0)
pac207_reg_write(spca50x->dev, 0x13, 0x01); //load registers to sensor (Bit 0, auto clear)
pac207_reg_write(spca50x->dev, 0x1c, 0x01); //not documented
PDEBUG(1, "pac207_start mode 176x144, mode = %x", mode);
} else {
/* 352x288 */
pac207_reg_read(spca50x->dev, 0x41, &buffer);
mode = buffer & 0xfe;
pac207_reg_write(spca50x->dev, 0x41, mode); //Set mode
if (spca50x->compress) {
pac207_reg_write(spca50x->dev, 0x02, 0x04); //PXCK = 12MHz / n 04
} else {
pac207_reg_write(spca50x->dev, 0x02, 0x0a); //PXCK = 12MHz / n
}
pac207_reg_write(spca50x->dev, 0x0e, 0x04); //PGA global gain (Bit 4-0)
pac207_reg_write(spca50x->dev, 0x13, 0x01); //load registers to sensor (Bit 0, auto clear)
pac207_reg_write(spca50x->dev, 0x1c, 0x01); //not documented
PDEBUG(1, "pac207_start mode 352x288, mode = %x", mode);
}
udelay(1000);
pac207_reg_write(spca50x->dev, 0x40, 0x01); //Start ISO pipe

// pac207_setbrightness(spca50x);
return;
}

static void pac207_stopN(struct usb_spca50x *spca50x)
{
pac207_reg_write(spca50x->dev, 0x40, 0x00); //Stop ISO pipe
pac207_reg_write(spca50x->dev, 0x41, 0x00); //Turn of LED
pac207_reg_write(spca50x->dev, 0x0f, 0x00); //Power Control
return;
}

static void pac207_shutdown(struct usb_spca50x *spca50x)
{
pac207_reg_write(spca50x->dev, 0x41, 0x00); //Turn of LED
pac207_reg_write(spca50x->dev, 0x0f, 0x00); //Power Control
return;
}

#ifdef GSPCA_ENABLE_REGISTERPLAY
static void pac207_RegRead(struct usb_spca50x *spca50x)
{
__u8 buffer;
RegAddress = RegAddress & 0xff;
pac207_reg_read(spca50x->dev, RegAddress, &buffer);
RegValue = buffer;
PDEBUG(0, "pac207_ReadReg, Reg 0x%02X value = %x", RegAddress,
RegValue);
return;
}

static void pac207_RegWrite(struct usb_spca50x *spca50x)
{
__u8 buffer;

RegAddress = RegAddress & 0xff;
buffer = RegValue & 0xff;
pac207_reg_write(spca50x->dev, RegAddress, buffer);
pac207_reg_write(spca50x->dev, 0x13, 0x01); //load registers to sensor (Bit 0, auto clear)
pac207_reg_write(spca50x->dev, 0x1c, 0x01); //not documented
PDEBUG(0, "pac207_WriteReg,Reg 0x%02X value = %x", RegAddress, buffer);
return;
}
#endif

#define BLIMIT(bright) (__u8)((bright>0x1a)?0x1a:((bright <4>dev, 0x02, &Pxclk);
Gbright = Pxclk;
spin_lock_irqsave(&spca50x->v4l_lock, flags);
luma = spca50x->avg_lum;
spin_unlock_irqrestore(&spca50x->v4l_lock, flags);

PDEBUG(2, "Pac207 lumamean %d", luma);
if ((luma <luma_mean> (luma_mean + luma_delta))) {
Gbright += ((luma_mean - luma) >> spring);
Gbright = BLIMIT(Gbright);
PDEBUG(2, "Pac207 Gbright %d", Gbright);
pac207_reg_write(spca50x->dev, 0x02,(__u8) Gbright);
pac207_reg_write(spca50x->dev, 0x13, 0x01); //load registers to sensor (Bit 0, auto clear)
pac207_reg_write(spca50x->dev, 0x1c, 0x01); //not documented
}
}
#undef BLIMIT
static int pac207_sofdetect(struct usb_spca50x *spca50x,struct spca50x_frame *frame, unsigned char *cdata,int *iPix, int seqnum, int *datalength)
{

int sof = 0;
int p = 0;
if (*datalength < 6)
return -1;
else {
for (p = 0; p <datalength>v4l_lock);
spca50x->avg_lum = cdata[p+9] ;
spin_unlock(&spca50x->v4l_lock);
PDEBUG(5, "mean luma %d", spca50x->avg_lum);
#endif
// copy the end of data to the current frame
memcpy(frame->highwater, cdata, p);
frame->highwater += p;
//totlen += p;
*iPix = p; //copy to the nextframe start at p
*datalength -= *iPix;
PDEBUG(5,
"Pixartcam header packet found, %d datalength %d !!",
p, *datalength );
return 0;
} else {
*iPix = 0;
return (seqnum+1);
}

}
}
/* GSPCA_ENABLE_REGISTERPLAY */
#endif // PAC207USB_H

hopelijk akn mij iemand helpen
groetjes frans
Terug naar boven
Profiel bekijken Stuur privébericht
Monday



Geregistreerd op: 07 Aug 2017
Berichten: 293

BerichtGeplaatst: Di Nov 21, 2017 4:25 am    Onderwerp: Reageren met citaat

helinlin20171121
ralph lauren outlet
uggs outlet
michael kors outlet
valentino shoes
canada goose outlet
ugg boots
cheap ugg boots
hermes handbags
nmd adidas
cheap uggs
uggs
longchamp outlet online
moncler jackets
michael kors handbags
polo ralph lauren
oakley sunglasses
michael kors outlet clearance
salvatore ferragamo
coach canada
coach canada
burberry sale
coach outlet
polo ralph lauren
ralph lauren outlet online
timberland outlet
canada goose sale
ugg boots
pandora jewelry
cheap jordans
louis vuitton outlet store
ralph lauren outlet
adidas shoes
ugg boots
polo ralph lauren outlet online
adidas yeezy boost
pandora jewelry
cheap jerseys
pandora jewelry outlet
ralph lauren uk
moncler coats
ugg outlet
pandora charms sale clearance
north face outlet online
louis vuitton outlet store
kate spade outlet
adidas superstar
ralph lauren outlet
ralph lauren outlet online
burberry outlet
moncler outlet
canada goose outlet
canada goose
christian louboutin
michael kors outlet clearance
adidas yeezy boost
nike outlet store
pandora charms sale clearance
canada goose jackets
nike outlet online
longchamp handbags
moncler outlet
uggs outlet
coach outlet
ugg boots
canada goose uk
coach outlet
ugg boots
canada goose clothing
fred perry
michael kors outlet
moncler
coach outlet
air jordans
coach outlet
gucci outlet
ray ban sunglasses
coach factory outlet
cheap ray ban sunglasses
coach outlet
louboutin shoes
ugg outlet
uggs canada
canada goose jackets
fitflops
pandora charms uk
canada goose clothing
jordan retro
coach outlet store online clearances
air jordan shoes
coach outlet
pandora jewelry
air max 2018
kate spade
coach outlet
michael kors outlet
kate spade outlet
ugg australia
ralph lauren uk
gucci handbags
coach outlet
nmd adidas
coach outlet online
ugg outlet
canada goose outlet
discount oakley sunglasses
canada goose outlet
ugg outlet
adidas nmd
ugg canada
canada goose uk
canada goose coats
kate spade handbags
nmd shoes
kate spade
canada goose
ugg outlet
pandora jewelry
mlb jerseys cheap
pandora charms
cheap uggs
michael kors outlet
ugg outlet
canada goose
oakley sunglasses
polo ralph lauren outlet online
michael kors outlet
ugg boots
ugg outlet
ralph lauren outlet
ugg outlet
uggs sale
moncler outlet
north face outlet
hermens bags
cheap jerseys from china
yeezy boost
ugg australia
adidas shoes
cat boots
nike outlet
adidas yeezy
uggs outlet
ralph lauren outlet
coach factory outlet
ralph lauren sale clearance
cheap nfl jerseys
cheap ray ban sunglasses
ugg boots
canada goose jackets uk
fred perry polo
ugg boots canada
north face outlet
supreme clothing
nike outlet store
air jordan shoes
ralph lauren outlet
moncler jackets
ralph lauren outlet
canada goose sale
louis vuitton outlet
nfl jerseys wholesale
ugg outlet
canada goose outlet
ferragamo outlet
valentino shoes outlet
red bottoms
jordan shoes
pandora outlet
ugg australia
cheap uggs
ugg boots
canada goose uk
ugg ustralia
coach outlet store
christian louboutin outlet
coach outlet
ultra boost
mbt shoes
moncler jackets
canada goose sale
canada goose outlet
adidas superstar
coach outlet store
nike shoes for men
uggs outlet
michael kors outlet store
north face outlet
ugg boots
red bottoms shoes
polo outlet
moncler
canada goose jackets
ugg outlet
canada goose outlet
michael kors outlet
cheap jordans
moncler uk
coach factory outlet
ralph lauren sale clearance
pandora charms sale
moncler outlet
nike shoes
michael kors outlet
ray ban sunglasses discount
ugg outlet
michael kors outlet
tory burch outlet
nike air max
mulberry bags
cheap ray bans
ralph lauren outlet
christian louboutin outlet
michael kors factory outlet
kate spade bags
canada goose outlet
hermes bags
ugg outlet
canada goose outlet
north face jackets
michael kors outlet
the north face
moncler jackets
mbt shoes
ugg outlet
jordan retro 11
longchamp uk
michael kors outlet
adidas outlet
ugg shoes
hermes birkin
coach factory outlet
ugg boots on sale
coach factory outlet
uggs on sale
ralph lauren outlet
pandora charms sale
cheap jordans
moncler outlet
coach factory outlet
nike shoes
ugg outlet
michael kors outlet store
canada goose
coach factorty outlet
adidas outlet
coach outlet store
nike outlet
polo ralph lauren outlet
coach outlet
canada goose uk
fitflops sale
longchamp outlet
ralph lauren
yeezy 350 boost
canadian goose
uggs outlet
coach factory outlet
ralph lauren outlet
coach factory outlet
cheap mlb jerseys
canada goose jackets
pandora outlet
cheap nfl jerseys
michael kors canada
pandora uk
uggs canada
canada goose outlet
canada goose
ugg outlet
michael kors handbags
burberry outlet
canada goose outlet
pandora charms
cheap mlb jerseys
canada goose outlet
coach factorty outlet
canada goose jackets
adidas yeezy
adidas nmd
nike shoes
ugg boots
jordans
ray ban sunglasses
polo outlet
air jordans
toms outlet
oakley sunglasses
adidas shoes
coach outlet store
coach outlet
salvatore ferragamo shoes
doudoune moncler
louis vuitton factory outlet
adidas outlet
coach outlet store online
ugg outlet
yeezy boost
christian louboutin outlet
coach outlet
canada goose
cheap jordans
birkenstocks
ferragamo shoes
jordan shoes
moncler outlet
canada goose jackets
ugg boots
ralph lauren uk
canada goose jackets
michael kors outlet clearance
canada goose outlet
pandora
cheap mlb jerseys
canada goose jackets
louis vuitton outlet
cheap oakley sunglasses
burberry
polo ralph lauren outlet online
ugg boots
canada goose jackets
polo ralph lauren outlet
pandora charms
canada goose jackets
michael kors outlet clearance
coach outlet
adidas shoes
louis vuitton outlet
ugg
red bottom shoes
canada goose uk
cheap ray bans
north face jackets
burberry outlet
pandora charms
canada goose
michael kors outlet
michael kors outlet online
ralph lauren outlet
ralph lauren outlet
polo ralph lauren outlet online
mulberry uk
coach outlet
moncler jackets
cheap jordans for sale
canada goose jackets
hermes handbags
louboutin shoes
supreme new york
nike outlet
coach outlet
michael kors outlet
kate spade handbag
burberry outlet store
hermes handbags
louis vuitton outlet online
ugg outlet online
coach outlet
coach handbags
ralph lauren uk
ugg outlet
louis vuitton outlet
ugg boots
christian louboutin
coach outlet
pandora outlet
ugg boots on sale
uggs clearance
burberry outlet canada
coach outlet
longchamp handbags
polo ralph lauren outlet online
pandora jewelry
ugg outlet
adidas yeezy
harden vol 1
ugg boots
cheap mlb jerseys china
canada goose sale
michael kors canada
michael kors uk
coach outlet store
north face jackets
coach factory outlet
louis vuitton
ugg shoes
canada goose coats
ray ban sunglasses
canada goose outlet
canada goose outlet
ugg sale
moncler jackets outlet
ugg outlet
coach factory outlet
coach factory outlet online
coach factory outlet
birkenstock sandals
ugg outlet store
coach outlet
canada goose outlet
ralph lauren outlet
hermes outlet
uggs
pandora jewelry
tory burch outlet store
longchamp outlet
michael kors outlet clearance
ugg boots
ugg outlet
ugg outlet
pandora charms
canada goose uk
coach outlet
timberland boots
yeezy boost 350
ugg boots
uggs clearance
nike air max
nike store
coach factory outlet online
ugg ustralia
uggs canada
cheap jordans free shipping
tory burch outlet
ugg uk
uggs
canada goose sale
coach outlet
cheap uggs
mulberry outlet
coach outlet online
canada goose outlet
north face jackets
canada goose outlet
michael kors outlet
oakley sunglasses
mulberry handbags
yeezy boost
longchamp handbags
michael kors handbags
cheap ray ban sunglasses
air max 2017
ugg boots for women
supreme clothing
coach factory outlet
ugg outlet
michael kors outlet online
michael kors outlet
adidas nmd
columbia sportswear
polo ralph lauren outlet
coach factory outlet
coach factory outlet
coach bags
ugg outlet
cheap jordans
louis vuitton outlet online
adidas yeezy
ugg outlet online
canada goose outlet
helinlin20171121
Terug naar boven
Profiel bekijken Stuur privébericht
Berichten van afgelopen:   
Nieuw onderwerp plaatsen   Reageren    Fedora-Linux.nl Forumindex -> Software Tijden zijn in GMT + 1 uur
Pagina 1 van 1

 
Ga naar:  
Je mag geen nieuwe onderwerpen plaatsen in dit subforum
Je mag geen reacties plaatsen in dit subforum
Je mag je berichten niet bewerken in dit subforum
Je mag je berichten niet verwijderen in dit subforum
Je mag niet stemmen in polls in dit subforum


Powered by phpBB © 2001, 2005 phpBB Group
Vertaling door Lennart Goosens.